Fivalo™ 2-in-1 Cabinet Lift & Support Jack Set - 2pcs
Secure checkout · Product support from Fivalo
Fivalo™ 2-in-1 Cabinet Lift & Support Jack Set - 2pcs
Your Extra Set of Hands for Cabinet Installation
Installing cabinets alone shouldn’t mean balancing panels on scrap wood or rushing before everything shifts. The Fivalo™ 2-in-1 Cabinet Lift & Support Jack Set gives you a stable pair of adjustable supports to lift, hold, align, and support cabinets, panels, tiles, boards, and workpieces while both hands stay free.
Built as an upgraded support system, it helps cabinet makers, installers, woodworkers, and DIYers raise materials to the right height, fine-tune the position, and install with confidence — without unstable blocks or needing a second person.
Lift, Support, and Fine-Tune the Fit
The matched two-jack setup helps support both sides evenly, making it easier to position upper cabinets, align panels, hold boards, support tiles, or adjust materials during installation. With an adjustable support range of approximately 38–60 cm / 14.96–23.62 in, it gives you practical height control for daily cabinet and workshop tasks
More Than a Labor-Saving Jack
This upgraded system is not just for lifting. Depending on the setup, it can be used as a cabinet support jack, panel holder, lifting aid, or clamping support for fitting and assembly work. The accessory system gives you more ways to handle installation tasks, helping you work cleaner, faster, and with better control.
Two Options for Different Jobs
Choose the setup that matches your workflow. The 3-in-1 upgraded model is ideal for cabinet lifting, tile support, and multi-use support tasks with accessory configurations such as F-clip and support-frame use. The fine-tuned upgrade model is designed for controlled lifting and lowering, with adjustable descent speed for smoother positioning when working with door panels, tiles, and heavier materials.
Why Woodworkers & Installers Love It
Choose the configuration for the job, then stay inside the rating for that mode.
1.Hands-Free Cabinet Support
Holds cabinets, panels, tiles, boards, and workpieces in position so both hands stay free for accurate installation.
2.Matched Pair for Better Balance
Two jacks help support both sides evenly, making cabinet and panel positioning easier and more stable.
3.Adjustable Height Control
Raise and support materials within a practical 38–60 cm / 14.96–23.62 in working range.
4.Multi-Use Upgraded Design
Use it for lifting, holding, supporting, fine-tuning, panel positioning, tile work, and workshop assembly tasks.
Control you can see before the first screw
The mechanism, scales, and contact surfaces are built around controlled positioning—not guesswork.
Scale-marked adjustment
Visible markings make paired height checks easier while you bring each side into position.
Broad contact surfaces
Wide ribbed support plates and rectangular slotted bases spread contact across the working surface.
Ratings matched to the mode
Up to 360 lb per pair for direct lifting; up to 180 lb per pair for extended cabinet support.
From first lift to final fastener
1. Place the pair
Work on flat, stable surfaces with one jack near each end and the load centered on the contact pads.
2. Raise in steps
Alternate between sides and watch the scale marks so the cabinet stays controlled as it reaches position.
3. Align and fasten
Check level and plumb, add required shims, then fasten to suitable wall structure using the cabinet maker’s instructions.
4. Unload, then release
Confirm the cabinet is independently secured, keep hands clear, and press each release gradually before removing the jacks.
Check alignment before the tools come out
The paired setup gives you time to verify level, reveal, and fastener placement while the cabinet stays supported. Once it is secured to the required wall structure, unload each jack and remove it from the work area.
Product details
Verified specifications
Set: 2 cabinet jack assemblies
Listed maximum extension: 23.4 in
Approximate base: 3.7 × 4.1 in
Approximate body height: 16 in
Scale-marked adjustment rails
Mode-specific ratings
Direct lift mode: up to 360 lb per pair.
Extended cabinet-support mode: up to 180 lb per pair.
Use the pair together, keep the load centered, and never exceed the rating for the selected configuration.
What’s included
2 × Cabinet jack assemblies
4 × Clip/support attachments in the two styles shown
6 × Protective covers
1 × Instruction manual
Safe use
Temporary positioning/support only; not structural shoring or overhead safety equipment. Inspect before use, work on flat stable surfaces, secure the cabinet independently before unloading, keep hands clear of pinch points, and press the release gradually.
Frequently asked questions
Can these jacks support an upper cabinet during installation?
Yes. The extended support frames are designed to hold a cabinet after it has been safely placed at working height. Use one jack near each end on a stable surface, then fasten the cabinet to suitable wall structure before unloading the jacks.
How high do they extend?
The manufacturer lists a maximum extension of 23.4 in. Measure from your stable working surface to the cabinet underside and allow for the contact pads before ordering.
What are the load ratings?
The pair is listed for up to 360 lb in direct lift mode and up to 180 lb in extended cabinet-support mode. Do not apply the higher lift rating to the extended support configuration.
Can one person install a cabinet with them?
The jacks can reduce the need to hold and balance the cabinet while aligning and fastening, but they do not replace safe lifting, suitable wall fasteners, or a second person when the cabinet or site conditions require one.
How do I lower the load?
First secure or independently support the load. Keep hands clear of pinch points and press the release gradually. No fine-descent claim is made, so maintain control and never release a loaded jack abruptly.
What comes in the set?
Two cabinet jack assemblies, four clip/support attachments in the two styles shown, six protective covers, and one instruction manual.
