Workshop Wall Cabinet Plan

Enhance your workshop or garage storage with this straightforward wall cabinet design, featuring both enclosed storage with an adjustable shelf and an open storage area. Constructed from a half sheet of plywood, a piece of hardboard, and a short 1x4, this cabinet is assembled using pocket hole screws for a secure fit.

Materials Needed:

Plywood:

• 3/4" (19.05 mm) thick for the sides, top, bottom, shelves, and doors.
• 1/4" (6.35 mm) thick for the back panel.

Hardware:

• Kreg Pocket-Hole Screws (1 1/4" or 31.75 mm and 2" or 50.8 mm).
• Wood glue.
• Screws for mounting the cabinet to the wall (optional, depending on your design).
• Hinges and handles for the doors (if adding doors).

Finishing Materials:

• Paint or stain.
• Screen molding (optional, for a finished edge).

Tools Required:

• Circular saw or table saw.
• Drill with Kreg pocket-hole jig.
• Brad nailer (for attaching back panel and moldings).
• Sandpaper or orbital sander.
• Paintbrushes or rags for finishing.

Cut List:

Sides:

• 2 pieces at 18" x 30" (457 mm x 762 mm).

Top and Bottom:

• 2 pieces at 18" x 24" (457 mm x 610 mm).

Shelves:

• 2 pieces at 18" x 24" (457 mm x 610 mm).

Back Panel:

• 1 piece at 24" x 30" (610 mm x 762 mm).

Optional Doors:

• 2 pieces at 12" x 24" (305 mm x 610 mm).

Assembly Steps:

Cut the Pieces:

• Cut all plywood pieces according to the dimensions provided above.

Drill Pocket Holes:

• Using the Kreg pocket-hole jig, drill pocket holes in the edges of the top, bottom, and sides where they will be joined.

Assemble the Frame:

• Attach the top and bottom pieces to the side panels using 1 1/4" (31.75 mm) Kreg pocket-hole screws. Ensure everything is square and flush.

Attach the Back Panel:

• Secure the 1/4" (6.35 mm) plywood back panel to the back of the frame using wood glue and brad nails. This will add structural integrity to the cabinet.

Install the Shelves:

• Decide on the shelf positions and drill pocket holes along the sides of the cabinet. Install the shelves at the desired height using screws or adjustable shelf pins.

Optional Doors:

• If adding doors, attach hinges to the sides of the cabinet and secure the doors in place.

Finish the Cabinet:

• Sand all surfaces smooth and apply paint or stain as desired.

Mounting:

• Use screws to mount the cabinet to the wall. Depending on the design, you can either mount it on a horizontal rail or directly to the studs in the wall.

Optional Customizations:

Adjustable Shelves:

• Use shelf pins or brackets to make the shelves adjustable.

Doors:

• Add cabinet doors for a more enclosed design.

Drawers:

• Incorporate drawers at the bottom for additional storage options.

Tool Hooks:

• Install small hooks inside for hanging tools or accessories.

This plan should provide a solid foundation for building a functional and sturdy wall cabinet for your workshop.