Juego de gatos elevadores y de soporte para armarios 2 en 1 Fivalo™ (paquete de 2)
Two working ratings: up to 360 lb per pair in lift mode; up to 180 lb per pair in extended support mode.
Secure checkout · Product support from Fivalo
Sujeta el gabinete donde debe quedar y, después, usa ambas manos para nivelarlo, calzarlo y fijarlo. Este sistema de dos gatos se convierte de gatos elevadores de trinquete en soportes extendidos de tercera mano y prensas para carpintería, lo que proporciona a quienes trabajan solos una instalación más controlada, desde el primer ajuste hasta el último tornillo.
- Dos gatos iguales sostienen ambos extremos del trabajo
- Configuraciones de elevación, soporte extendido y sujeción
- Extensión máxima indicada: 23.4 in
- Capacidad del par: hasta 360 lb en modo de elevación
- Capacidad del par: hasta 180 lb en modo de soporte extendido
- Rieles con marcas de escala y amplias superficies de contacto protectoras
Deja de hacer equilibrio. Empieza a alinear.
Los bloques de desecho y los soportes improvisados pueden moverse justo cuando necesitas ambas manos. Coloca el par sobre superficies planas y estables, eleva cada lado en pasos controlados, comprueba el nivel y la alineación y, después, fija el gabinete utilizando los elementos de fijación y la estructura de pared especificados por el fabricante del gabinete.
Tres formas de trabajar
Sujetar gabinetes superiores
Instala los bastidores de soporte anchos y utiliza el par debajo del gabinete después de colocarlo de forma segura a la altura de trabajo. Ajusta cada lado mientras nivelas, calzas y fijas.
Elevar y nivelar
Utiliza las placas de contacto anchas para posicionamientos de corto alcance debajo de gabinetes bajos, muebles o piezas de trabajo apoyadas. Mantén la carga centrada y usa ambos gatos juntos.
Sujetar bordes de paneles
Instala los accesorios de sujeción verificados para sujetar bordes de paneles compatibles mientras compruebas la alineación a ras. El modo de sujeción está diseñado para la fijación temporal de piezas, no sustituye a las prensas específicas del proyecto cuando se requiere mayor fuerza o alcance.
Detalles verificados del producto
- Juego: 2 conjuntos de gatos para gabinetes
- Extensión máxima indicada: 23.4 in
- Base aproximada: 3.7 × 4.1 in
- Altura aproximada del cuerpo: 16 in
- Capacidad en modo de elevación: hasta 360 lb por par
- Capacidad en modo de soporte extendido: hasta 180 lb por par
Qué incluye
- 2 × conjuntos de gatos para gabinetes
- 4 × accesorios de clip/soporte en los dos estilos mostrados
- 6 × cubiertas protectoras
- 1 × manual de instrucciones
Úsalo de forma segura
Esta herramienta proporciona posicionamiento y soporte temporales; no es un apuntalamiento estructural ni un equipo de seguridad para trabajos en altura. Inspecciona todas las piezas antes de usarla, trabaja sobre superficies planas y estables, centra la carga, utiliza el par en conjunto y nunca excedas la capacidad correspondiente al modo seleccionado. Fija el gabinete a una estructura de pared adecuada antes de descargar los gatos. Mantén las manos alejadas de los puntos de pellizco y presiona el desbloqueo gradualmente solo después de que la carga esté sostenida de forma independiente.
Juego de gatos elevadores y de soporte para armarios 2 en 1 Fivalo™ (paquete de 2)
Lift, support, and align from a stable paired setup instead of rebuilding a stack of scraps every time the cabinet moves.
Two jacks. Three jobs. Both hands back on the install.
Stop balancing. Start aligning.
Scrap blocks can shift just when you need both hands. Place one jack near each end, raise in controlled steps, then level, shim, and fasten with the cabinet held at the working position.
One matched pair. Three ways to work.
Choose the configuration for the job, then stay inside the rating for that mode.
1. Support upper cabinets
Fit the wide support frames and use the pair beneath a cabinet after it has been safely placed at working height.
2. Lift and level
Use the broad contact plates for short-range positioning under base cabinets, furniture, and supported workpieces.
3. Clamp panel edges
Fit the clamp attachments for temporary workholding while you check flush alignment on compatible panel edges.
Control you can see before the first screw
The mechanism, scales, and contact surfaces are built around controlled positioning—not guesswork.
Scale-marked adjustment
Visible markings make paired height checks easier while you bring each side into position.
Broad contact surfaces
Wide ribbed support plates and rectangular slotted bases spread contact across the working surface.
Ratings matched to the mode
Up to 360 lb per pair for direct lifting; up to 180 lb per pair for extended cabinet support.
From first lift to final fastener
1. Place the pair
Work on flat, stable surfaces with one jack near each end and the load centered on the contact pads.
2. Raise in steps
Alternate between sides and watch the scale marks so the cabinet stays controlled as it reaches position.
3. Align and fasten
Check level and plumb, add required shims, then fasten to suitable wall structure using the cabinet maker’s instructions.
4. Unload, then release
Confirm the cabinet is independently secured, keep hands clear, and press each release gradually before removing the jacks.
Check alignment before the tools come out
The paired setup gives you time to verify level, reveal, and fastener placement while the cabinet stays supported. Once it is secured to the required wall structure, unload each jack and remove it from the work area.
Product details
Verified specifications
Set: 2 cabinet jack assemblies
Listed maximum extension: 23.4 in
Approximate base: 3.7 × 4.1 in
Approximate body height: 16 in
Scale-marked adjustment rails
Mode-specific ratings
Direct lift mode: up to 360 lb per pair.
Extended cabinet-support mode: up to 180 lb per pair.
Use the pair together, keep the load centered, and never exceed the rating for the selected configuration.
What’s included
2 × Cabinet jack assemblies
4 × Clip/support attachments in the two styles shown
6 × Protective covers
1 × Instruction manual
Safe use
Temporary positioning/support only; not structural shoring or overhead safety equipment. Inspect before use, work on flat stable surfaces, secure the cabinet independently before unloading, keep hands clear of pinch points, and press the release gradually.
Frequently asked questions
Can these jacks support an upper cabinet during installation?
Yes. The extended support frames are designed to hold a cabinet after it has been safely placed at working height. Use one jack near each end on a stable surface, then fasten the cabinet to suitable wall structure before unloading the jacks.
How high do they extend?
The manufacturer lists a maximum extension of 23.4 in. Measure from your stable working surface to the cabinet underside and allow for the contact pads before ordering.
What are the load ratings?
The pair is listed for up to 360 lb in direct lift mode and up to 180 lb in extended cabinet-support mode. Do not apply the higher lift rating to the extended support configuration.
Can one person install a cabinet with them?
The jacks can reduce the need to hold and balance the cabinet while aligning and fastening, but they do not replace safe lifting, suitable wall fasteners, or a second person when the cabinet or site conditions require one.
How do I lower the load?
First secure or independently support the load. Keep hands clear of pinch points and press the release gradually. No fine-descent claim is made, so maintain control and never release a loaded jack abruptly.
What comes in the set?
Two cabinet jack assemblies, four clip/support attachments in the two styles shown, six protective covers, and one instruction manual.
A matched two-jack system for installers who want fewer makeshift props and more control at the cabinet.