Sett ta’ Fivalo™ Lift u Ġakk għall-Irfigħ u s-Sostenn tal-Kabinetti 2 f’1 (Pakkett ta’ 2)
Two working ratings: up to 360 lb per pair in lift mode; up to 180 lb per pair in extended support mode.
Secure checkout · Product support from Fivalo
Żomm il-kabinett fejn jeħtieġ li jkun—imbagħad uża ż-żewġ idejn biex tillivellah, tpoġġi l-ispazjaturi u twaħħlu. Din is-sistema b’żewġ ġakkijiet tinbidel minn ġakkijiet tal-irfigħ bir-ratchet għal appoġġi estiżi tat-tielet id u klampi għax-xogħol tal-injam, u tagħti lill-installaturi li jaħdmu waħedhom setup iktar ikkontrollat mill-ewwel aġġustament sal-aħħar kamin.
- Żewġ ġakkijiet identiċi jsostnu ż-żewġt itruf tax-xogħol
- Konfigurazzjonijiet għall-irfigħ, appoġġ estiż u kklampjar
- Estensjoni massima ddikjarata: 23.4 in
- Kapaċità tal-par: sa 360 lb fil-modalità tal-irfigħ
- Kapaċità tal-par: sa 180 lb fil-modalità tal-appoġġ estiż
- Linji mmarkati fuq il-binarji u uċuħ wesgħin protettivi ta’ kuntatt
Tibqax tibbilanċja. Ibda allinja.
Biċċiet tal-injam u appoġġi improvizzati jistgħu jiċċaqilqu eżatt meta jkollok bżonn iż-żewġ idejn. Poġġi l-par fuq uċuħ ċatti u stabbli, għolli kull naħa b’passi kkontrollati, iċċekkja l-livell u l-allinjament, imbagħad waħħal il-kabinett billi tuża l-qfieli meħtieġa mill-manifattur tal-kabinett u l-istruttura tal-ħajt.
Tliet modi kif taħdem
Appoġġa l-kabinetti ta’ fuq
Waħħal il-frejms wesgħin ta’ appoġġ u uża l-par taħt il-kabinett wara li dan ikun tqiegħed b’mod sigur fl-għoli tax-xogħol. Aġġusta kull naħa waqt li tillivella, tpoġġi l-ispazjaturi u twaħħal.
Għolli u llivella
Uża l-pjanċi wesgħin ta’ kuntatt għall-ippożizzjonar fuq distanzi qosra taħt kabinetti ta’ bażi, għamara jew biċċiet tax-xogħol sostnuti. Żomm it-tagħbija ċċentrata u uża ż-żewġ ġakkijiet flimkien.
Ikklampja t-truf tal-pannelli
Waħħal l-aċċessorji tal-klampi vverifikati biex iżżomm it-truf kompatibbli tal-pannelli waqt li tiċċekkja l-allinjament indaqs. Il-modalità tal-klamp hija għall-iffissar temporanju tax-xogħol, mhux sostitut għal klampi speċifiċi għall-proġett meta jkunu meħtieġa forza jew firxa akbar.
Dettalji tal-prodott ivverifikati
- Sett: 2 assemblaġġi ta’ ġakkijiet għall-kabinetti
- Estensjoni massima ddikjarata: 23.4 in
- Bażi approssimattiva: 3.7 × 4.1 in
- Għoli approssimattiv tal-korp: 16 in
- Kapaċità fil-modalità tal-irfigħ: sa 360 lb kull par
- Kapaċità fil-modalità tal-appoġġ estiż: sa 180 lb kull par
X’hemm inkluż
- 2 × assemblaġġi ta’ ġakkijiet għall-kabinetti
- 4 × aċċessorji tal-klipps/appoġġ fiż-żewġ stili murija
- 6 × għata protettiva
- 1 × manwal tal-istruzzjonijiet
Użah b’mod sigur
Din l-għodda tipprovdi pożizzjonar u appoġġ temporanji; mhijiex strutturi ta’ sostenn jew tagħmir tas-sigurtà għal xogħol fuq ras il-bniedem. Iċċekkja l-partijiet kollha qabel l-użu, aħdem fuq uċuħ ċatti u stabbli, iċċentra t-tagħbija, uża l-par flimkien, u qatt taqbeż il-kapaċità għall-modalità magħżula. Waħħal il-kabinett ma’ struttura xierqa tal-ħajt qabel tneħħi t-tagħbija mill-ġakkijiet. Żomm idejk ’il bogħod mill-punti ta’ qris u agħfas ir-rilaxx bil-mod biss wara li t-tagħbija tkun sostnuta b’mod indipendenti.
Sett ta’ Fivalo™ Lift u Ġakk għall-Irfigħ u s-Sostenn tal-Kabinetti 2 f’1 (Pakkett ta’ 2)
Lift, support, and align from a stable paired setup instead of rebuilding a stack of scraps every time the cabinet moves.
Two jacks. Three jobs. Both hands back on the install.
Stop balancing. Start aligning.
Scrap blocks can shift just when you need both hands. Place one jack near each end, raise in controlled steps, then level, shim, and fasten with the cabinet held at the working position.
One matched pair. Three ways to work.
Choose the configuration for the job, then stay inside the rating for that mode.
1. Support upper cabinets
Fit the wide support frames and use the pair beneath a cabinet after it has been safely placed at working height.
2. Lift and level
Use the broad contact plates for short-range positioning under base cabinets, furniture, and supported workpieces.
3. Clamp panel edges
Fit the clamp attachments for temporary workholding while you check flush alignment on compatible panel edges.
Control you can see before the first screw
The mechanism, scales, and contact surfaces are built around controlled positioning—not guesswork.
Scale-marked adjustment
Visible markings make paired height checks easier while you bring each side into position.
Broad contact surfaces
Wide ribbed support plates and rectangular slotted bases spread contact across the working surface.
Ratings matched to the mode
Up to 360 lb per pair for direct lifting; up to 180 lb per pair for extended cabinet support.
From first lift to final fastener
1. Place the pair
Work on flat, stable surfaces with one jack near each end and the load centered on the contact pads.
2. Raise in steps
Alternate between sides and watch the scale marks so the cabinet stays controlled as it reaches position.
3. Align and fasten
Check level and plumb, add required shims, then fasten to suitable wall structure using the cabinet maker’s instructions.
4. Unload, then release
Confirm the cabinet is independently secured, keep hands clear, and press each release gradually before removing the jacks.
Check alignment before the tools come out
The paired setup gives you time to verify level, reveal, and fastener placement while the cabinet stays supported. Once it is secured to the required wall structure, unload each jack and remove it from the work area.
Product details
Verified specifications
Set: 2 cabinet jack assemblies
Listed maximum extension: 23.4 in
Approximate base: 3.7 × 4.1 in
Approximate body height: 16 in
Scale-marked adjustment rails
Mode-specific ratings
Direct lift mode: up to 360 lb per pair.
Extended cabinet-support mode: up to 180 lb per pair.
Use the pair together, keep the load centered, and never exceed the rating for the selected configuration.
What’s included
2 × Cabinet jack assemblies
4 × Clip/support attachments in the two styles shown
6 × Protective covers
1 × Instruction manual
Safe use
Temporary positioning/support only; not structural shoring or overhead safety equipment. Inspect before use, work on flat stable surfaces, secure the cabinet independently before unloading, keep hands clear of pinch points, and press the release gradually.
Frequently asked questions
Can these jacks support an upper cabinet during installation?
Yes. The extended support frames are designed to hold a cabinet after it has been safely placed at working height. Use one jack near each end on a stable surface, then fasten the cabinet to suitable wall structure before unloading the jacks.
How high do they extend?
The manufacturer lists a maximum extension of 23.4 in. Measure from your stable working surface to the cabinet underside and allow for the contact pads before ordering.
What are the load ratings?
The pair is listed for up to 360 lb in direct lift mode and up to 180 lb in extended cabinet-support mode. Do not apply the higher lift rating to the extended support configuration.
Can one person install a cabinet with them?
The jacks can reduce the need to hold and balance the cabinet while aligning and fastening, but they do not replace safe lifting, suitable wall fasteners, or a second person when the cabinet or site conditions require one.
How do I lower the load?
First secure or independently support the load. Keep hands clear of pinch points and press the release gradually. No fine-descent claim is made, so maintain control and never release a loaded jack abruptly.
What comes in the set?
Two cabinet jack assemblies, four clip/support attachments in the two styles shown, six protective covers, and one instruction manual.
A matched two-jack system for installers who want fewer makeshift props and more control at the cabinet.